Safety pressure sensitive sensor installed on the edge of the component.
Safety pressure sensitive sensor installed on the edge of the component.
Safety pressure sensitive sensor installed on the edge of the component.
Safety pressure sensitive sensor installed on the edge of the component.
Safety pressure sensitive sensor installed on the edge of the component.

Safety pressure sensitive sensor installed on the edge of the component.

Model
LS-PSE

Item specifics

Detection method
Pressure sensing method
Maximum sensing angle
＜90°
Protection level
IP65

Review

Description

product description
Product parameter
Product size drawing and parts
Product application scenarios and others
Safety pressure sensitive sensor installed on the edge of the component.
Product Features

Safe touch price is composed of two elements made of conductive silicone, separated by a certain distance. The end of the safety margin can be connected with different end pieces up and down, depending on its application. After inserting it into the rubber sleeve and connecting the switch, all components form a complete system. The safety edge sensor can be easily and quickly assembled by the user.

FAQ:

1) Escalator safety edge has high trigger sensitivity, strong reliability, and meets the highest safety standards.

2) Small size, suitable for use in small spaces.

3) Escalator safety edge can be installed with the type, according to user requirements, it can be used in arc-shaped or other shapes of anti-pinch protection occasions.

4) Safe edge protection meets extreme weather conditions and is suitable for indoor or outdoor installation. Protection grade IP65.

5) New safety bumper edge is suitable for various complex industrial occasions. Products with special requirements such as oil resistance, acid and alkali resistance can be selected.

project

Safe touch

Detection method

Pressure sensing method

Maximum sensing angle

＜90°

Trigger force (according to specifications and usage)

≥50N-250N

Mechanical life

＞3,000,000 times

Surface protection layer material

TPE elastomer, EPDM rubber, CR rubber

Ambient temperature

-20 degrees -55 degrees

Protection level

IP65

Maximum humidity (23 degrees)

95% (condensation)

Response time

13ms

Security Classification

stand by

stand by

Cat.3

Cat.3

＞30 years

＞30 years

3*107

3*107

52560/year

52560/year

6.99*10-10 1/h (SIL3)

6.99*10-10 1/h（SIL3）

The safety edge contact system composed of the safety edge and RS8300, SRA/B safety controller complies with the following standards.

EN1760-2 ISO1856-2 EN62061 EN ISO138849-1 IEC61508 EN60204-1

 

Safety contact edge profile table
Safety touch edge mounting base and applicable specifications
Application

When the moving parts equipped with safety contact edges hit the operator (or the operator hits the moving parts), these flexible safety edges will be compressed and send a signal to the power source to stop the movement of these parts. Various lengths are available, so it is very flexible in assembly. The safety contact edge is a flexible and bendable ribbon, which can be fixed on the edge of moving parts that are in danger of squeezing and shearing, such as machine tool tables and electric doors.

recommend

The safety edge is used on the edge of the rolling door to control the lifting.

The safety edge is used on the edge of the rolling door to control the lifting.

Model : LS-PSE

It can be used to protect the moving edge of the machine tool to install safe touch edges.

It can be used to protect the moving edge of the machine tool to install safe touch edges.

Model : LS-PSE

A safety edge sensor that can be used to protect the moving parts of machinery.

A safety edge sensor that can be used to protect the moving parts of machinery.

Model : LS-PSE

Protective products used in elevators are pressure-sensitive safety edges.

Protective products used in elevators are pressure-sensitive safety edges.

Model : LS-PSE

KeyWords