- Edge length min/max
- Safety mat switching current
- Response time
Machinery safety definition
Machinery safety refers to the ability of a machine to perform a predetermined function in accordance with the predetermined conditions of use, or not cause damage or endanger health during transportation, installation, adjustment, etc.
Target: For the personal safety of workers near dangerous equipment.
Purpose: To reduce the possibility of operators being injured in an industrial environment.
Safety mat installation：
Please follow the steps below to install Safety mat:
Take out the Safety mat and installation accessories, check whether the contents of the package are consistent with the package list provided, and check whether the safety mat is intact.
2) Prepare the installation site:
The installation site needs to be flat, and the installation ground cannot have holes with a diameter of more than 20mm or changes in the height of the ground. Any ground defects will cause the safety function of the safety carpet to be lost.
3) Remove dirt particles on the installation floor to ensure that the surface is dry.
Pressure sensing method
Maximum allowable load (8 hours)
Safety carpet area
Edge length min/max
Surface protection layer
status of use
Safety mat switching current
Maximum humidity (23 degrees)
EN 1760-1 reset command
IEC 61508: PFHS
6.99*10-10 1/h (SIL3)
As an important protection device for safety protection switches, Safety mat is used in conjunction with the Safety mat controller to achieve a safer production environment. Generally, it is laid on the ground around dangerous machines, equipment, etc., so as to achieve warnings for dangerous areas. Protection of people and machines. The working principle of Safety mat is that when a person steps on the safety mat, the safety mat will sense the pressure change and output a switch signal. Through the detection of the Safety mat controller, it will cut off the power supply of the machinery and equipment, thereby protecting the people and The safety of the machine. But the prerequisite is that the safety mat is used in conjunction with the safety mat controller.