The safety mat is laid on the ground of the workshop to control the operation of the machine.
- Safety carpet area
- Edge length min/max
- Protection level
Safety mat and matched safety relays form a control area. Each control unit can be a safety mat, or multiple safety mats in series to form a control area. The series use of Safety mat can connect up to 10 safety mats in series. However, the maximum area of a control area should not be greater than 8 square meters.
The Safety mat protection system has the following advantages:
1) High trigger sensitivity, which can provide safety protection for people weighing more than 20 kg.
2) The laying area is flexible, and the safety carpet protection system of different sizes or shapes can be customized according to user requirements.
3) Suitable for various environmental conditions.
4) Different types of Safety mat can be selected according to different working conditions.
Pressure sensing method
Maximum allowable load (8 hours)
Safety carpet area
Edge length min/max
Surface protection layer
status of use
Safety mat switching current
Maximum humidity (23 degrees)
EN 1760-1 reset command
IEC 61508: PFHS
6.99*10-10 1/h (SIL3)
As an industrial safety carpet, what stands out is the "safety" aspect. It has the safety functions that need to be realized. The carpet suitable for industry needs to be laid flat on the floor of the workshop. When someone enters by mistake and steps on the Safety mat, the safety mat will generate a signal that can control the stop or operation of the machine to achieve protection. In terms of material, it is also different from ordinary carpets. Safety mat needs to adapt to the working environment of the workshop. It must have strong corrosion resistance, tread resistance, and high temperature resistance to overcome the oily environment.
The safety carpet protection system can detect whether there are people in the laying area within a certain period of time,
Model : LS