Personnel identification safety protection navigation positioning safety laser scanner
- Model
- XD-TOF-30
Item specifics
- Product name
- 2D-TOF navigation type safety laser scanner
- Detection range
- 0.1-20m@90% reflectivity 0.1-8m@10% reflectivity
- Scanning frame rate
- 10-30Hz
- Ranging accuracy
- ±30mm
- Scan angle range
- 270º
- Point cloud data merge
- 1/2/4/8 points
Review
Description
Introduction to 2d laser profile scanner

CYNDAR Technology develops high-performance lidar products. Designed on the principle of TOF (Time of flight) to obtain high-precision distance information, and coordinate with the rotation of the motor to complete a two-dimensional scan of the surrounding environment.
It can achieve reliable measurement within 20m with an angle range of 270°. Thanks to the advantages of the TOF solution and Xinda's unique high-performance time measurement technology, the distance measurement performance of the surface is much higher than that of the triangulation radar. Even for the whiteboard measurement at 20m, the range accuracy of ±30mm can be obtained.
Using TOF (Time of Flight) distance measurement technology to ensure that the accuracy of the installed laser scanner will not change with the distance.
In the condition of long-distance objects, the measurement accuracy is still accurate and stable
.




Safety laser scanner data communication mode
There are two modes for the data communication between the laser navigation radar and the host computer, one is the passive upload data mode of the radar, and the other is the active radar upload data mode.
The radar passive upload data mode means that when the upper computer and the radar can communicate with the network normally, the upper computer
The machine turns on the radar according to the lidar IP and sends data requests directly to obtain lidar data.
The radar active data upload mode refers to the configuration of the network port IP connected to the radar according to the configuration of DestIP and DestPort in the radar. The upper computer opens the port for receiving data according to the DestIP and DestPort in the configuration interface, and opens according to the lidar IP Radar, so as to obtain the data actively uploaded by the radar.